![Building the P-51 Mustang Pedal Plane, Step 12: Install Windshield, Final Paint & Assembly [END OF BUILD]](http://www.highdensitystyle.com/wp-content/uploads/2016/08/P51.jpg)
Step 12 is the last of videos I recorded of the build. I finish the windshield install and show a few of the painting steps. I did not record the installation of stickers or any of the final finishing details, but if you have a question or want to see a photo of a specific […]
In this step I start priming the airplane for paint and begin some of the painting. While it was an extra step, I chose to paint the interior a green color to try and mimic the zinc chromate used on aircraft to prevent rusting. I also started with a paint brush rather than spray paint […]
In this step I adjust the propeller shaft, assemble the drive pulley that is connected to the pedal crank, and modify and fit the wheels. Instead of using a file for the angled holes in the drive pulley centers, I used a drill and show that in video six.
In these videos, I work on the windshield frame and fit the fuselage covers.
Congratulations to the first five winners of our summer-long giveaway. There are still five more chances to win at www.flyhighdensity.com
Congratulations to our week two, summer-long giveaway winner, buffy0328… check your e-mail to claim your prize. There are still eight more chances to win at www.flyhighdensity.com We hope your summer is uplifting!
Congratulations to our first summer-long giveaway winner, Jada N. of Tallahassee, FL. There are still nine(r) more chances to win. Enter here: www.flyhighdensity.com Take flight with High Density!
![Building the P-51 Mustang Pedal Plane, Step 12: Install Windshield, Final Paint & Assembly [END OF BUILD]](http://www.highdensitystyle.com/wp-content/uploads/2016/08/P51-120x120_1.jpg)
![Building the P-51 Mustang Pedal Plane, Step 12: Install Windshield, Final Paint & Assembly [END OF BUILD]](http://www.highdensitystyle.com/wp-content/uploads/2016/08/P51-1110x644_c.jpg)
